激光空间相干合成效果评价方法的研究

根据目标上实际最大光强与理想合成效果下最大光强的比值定义了合成效果因子,用以评价相干合成效果.在此基础上研究了影响相干合成效果的主要因素,并对合成效果因子的传输特性进行了研究.结果表明:阵列紧密程度对合成效果影响不大,在较小的空间占空比下有可能得到较好的合成效果.影响合成效果的主要因素是随机相位差,当随机相位差增大到一定程度时,光束合成其实已经由相干合成过渡到了非相干合成,得不到预期的相干合成效果;随着传输距离的增大,空间占空比对合成效果因子的影响将进一步减小,影响合成效果的主要因素之一是随机相位差.     

2010年研究生数学建模竞赛A题综述

第七届全国研究生数学建模竞赛A题是生物信息学中的一个急需解决的问题.虽然有关问题的研究已经经历了十多年,但由于问题的复杂性,人们的认识还很局限,基本的结论大多还以定性的为主,定量的探讨正方兴未艾.对参赛队员来讲解决该问题是一个极大的挑战.研究生们在讨论该问题时,大多直接进行分类.然而对于一个小样本的学习问题,显然这样做是行不通的.所以问题的关键是从数学和生物学角度减少用于分类的特征数目.同时,对于获取的基因标签,需要从临床上或生物学角度找到验证.该问题的求解过程引导研究生们从数学建模走向解决实际问题.     

网络品牌忠诚驱动因素分类研究

将网络品牌分为传统品牌的网络延伸和网络新品牌两种形式,通过分析网络品牌忠诚的动态形成过程,构建了网络品牌忠诚驱动要素研究模型。实证研究发现,网络品牌的符号因素、属性因素、精神因素、价值观因素、传播因素、体验因素都与网络品牌忠诚正相关,但两类网络品牌忠诚的关键驱动因素存在差别。体验因素、价值观因素和属性因素是网络新品牌忠诚的关键驱动因素,而属性因素、体验因素和传播因素对网络化的传统品牌忠诚度有重要影响。     

基于SEM的气象服务公众满意度测评模型

文章在传统顾客满意度测评模型(ACSI)的核心概念和架构的基础上,结合气象服务独特的特点,对其进行了修改和更新,构建了气象服务公众满意度测评的结构方程模型。并进行了相应的实证研究。通过问卷调查获得数据,运用SPSS和SAS等统计软件进行检验,经过一次修改得到较好的拟合模型,在研究分析的基础上给出相应的结论和建议。     

A NOTE ON GENERALIZED ABSOLUTE SUMMABILITY FACTORS FOR A TRIANGULAR MATRIX

In this paper, a general theorem on | A, δ |k -summability factors of infinite series is proved under different conditions.     

Thermal fracture of a functionally graded/homogeneous bimaterial with system of cracks

The thermal fracture of a bimaterial consisting of a homogeneous material and a functionally graded material (FGM) with a system of internal cracks and an interface crack is investigated. The bimaterial is subjected to a heat flux. The thermal properties of FGM are assumed to be continues functions of the thickness coordinate, while the elastic properties are constants. The method of the solution is based on the singular integral equations. For a special case where the interface crack is much larger than the internal cracks in the FGM the asymptotic analytical solution of the problem is obtained as series in a small parameter (the ratio between sizes of the internal and interface crack) and the thermal stress intensity factors (TSIFs) are derived as functions of geometry of the problem and material characteristics. A parametric analysis of the effects of the location and orientation of the cracks and of the inhomogeneity parameter of FGM’s thermal conductivity on the TSIFs is performed. The results are applicable to such kinds FGMs as ceramic/ceramic FGMs, e.g., TiC/SiC, MoSi₂/Al₂O₃ and MoSi₂/SiC, and also some ceramic/metal FGMs.     

污泥的超声破解实验研究

本文在测量超声破解污泥试验所用反应器声场的基础上,主要研究了复频超声作用下,超声频率和换能器位置对污泥破解效果的影响。在此基础上采用两个同相换能器,以污泥滤液COD、NH₃-N、TP的增量,首次研究了复频超声破解污泥的效果,且详细探讨了影响复频超声破解污泥的影响因素（不同频率组合、不同功率组合、不同时间组合）。实验结果与理论分析符合较好,从而说明超声是一种有效的破解污泥的方法,进而对超声处理污泥的规律进行研究,这将为超声处理污泥提供一定的实验基础。     

A high-precision 1D dynamic angular measuring system based on linear CCD for Fengyun-2 meteorological satellite

The Fengyun-2 (FY-2) meteorological satellite uses a one-dimensional dynamic angular measuring system to evaluate the stepping accuracy of the scanning mirror. The basic principle of this angular measurement is detecting the light-spot position displacement using a linear charge-coupled device (CCD). This paper presents the design of this non-contact and non-destructive measuring system. To achieve high repeatability and accuracy the centroid method is employed to estimate the light-spot energy gravity, with 20-segment polygonal approximations as a nonlinear compensation. Experimental results show that the measurement system can achieve dynamic angular measurement with up to ±5″ accuracy and 3.5″ repeatability, which makes a credible evaluation for the scanning mirror of FY-2 meteorological satellite.     

Low-lying resonances in F and B

In a simple potential model, we have computed energies and widths of low-lying resonances of ¹⁴F and have compared them with recent experimental results. Consequences for ¹⁴B are summarized.     

Are accurate computations of the 13C′ shielding feasible at the DFT level of theory?

The goal of this study is twofold. First, to investigate the relative influence of the main structural factors affecting the computation of the ¹³C′ shielding, namely, the conformation of the residue itself and the next nearest‐neighbor effects. Second, to determine whether calculation of the ¹³C′ shielding at the density functional level of theory (DFT), with an accuracy similar to that of the ¹³C^α shielding, is feasible with the existing computational resources. The DFT calculations, carried out for a large number of possible conformations of the tripeptide Ac‐G XY ‐NMe, with different combinations of X and Y residues, enable us to conclude that the accurate computation of the ¹³C′ shielding for a given residue X depends on the: (i) (?,ψ) backbone torsional angles of X ; (ii) side‐chain conformation of X ; (iii) (?,ψ) torsional angles of Y ; and (iv) identity of residue Y . Consequently, DFT‐based quantum mechanical calculations of the ¹³C′ shielding, with all these factors taken into account, are two orders of magnitude more CPU demanding than the computation, with similar accuracy, of the ¹³C^α shielding. Despite not considering the effect of the possible hydrogen bond interaction of the carbonyl oxygen, this work contributes to our general understanding of the main structural factors affecting the accurate computation of the ¹³C′ shielding in proteins and may spur significant progress in effort to develop new validation methods for protein structures. © 2013 Wiley Periodicals, Inc.